Battery Switches

  • Hella Battery Switch with Removable Key
    Hella battery switch, single circuit, with removable key. Rated 50A continuous. Max intermittent load 1000A for 10 seconds. Manufactured from non-ferrous metals with an impact resistant polymer housing with shaft and O-ring seals. Much copied, beware of cheap imitations.
    Part No. Description Price Quantity
    201000
    Switch battery single pole with red removable key 50A / 500A HELLA 6EK 002 843-051 6EK002843051
    $39.00 Inc GST
  • HELLA Heavy Duty Battery Switch with Removable Key
    Hella battery switch, heavy duty, single pole, all metal with removable key. Rated 100A continuous. Max intermittent load 2500A for 10 seconds. M10 studs. Cutout d24mm, fastening holes d6,5mm, pitch 100mm. Flange 120mm x 58mm. Protrusion 62mm, intrusion 47mm. Spare key see 201901.
    Part No. Description Price Quantity
    201001
    Switch battery single pole metal with removable key 100A / 2500A HELLA 6EK 001 559-001 6EK001559001
    $122.00 Inc GST
  • Part No. Description Price Quantity
    201002
    Switch battery single pole metal with removable key 250A continuous, 2500A cranking BOSCH 0341002003
    $181.00 Inc GST
  • Cole Hersee Waterproof Battery Switch
    The Cole Hersee 75920 Battery Switch is rated up to 400A continuous and 3000A cranking current at 12V. Waterproof and dustproof to IP68, the switch can be mounted in exposed locations. Composite engineered polymer housing will not rust or corrode. Large barrier on base prevents accidental shorting of battery terminals. M10 Studs.
    Part No. Description Price Quantity
    201005
    Switch battery single pole with lockout, red actuator 300A / 3000A COLE HERSEE 75920-BX HM7592B
    $195.00 Inc GST
    201006
    Switch battery single pole with lockout, yellow actuator 300A / 3000A COLE HERSEE 75920-01BX HM7592Y
    $195.00 Inc GST
  • Carling Technologies BD-Series Lock-out Battery Switch
    Carling Technologies BD-Series battery disconnect switch is designed to minimize battery drain, impart maintenance personnel safety, and when used in conjunction with a padlock, provides lock-out protection.12VDC/24VDC, rated 300A continuous, 1500A cranking, sealed IP67, M10 terminal studs.
    Part No. Description Price Quantity
    201007
    Switch battery single pole with lockout, red actuator 300A / 1500A M10 studs CARLINGSWITCH BDB10-RA
    $104.00 Inc GST
    201008
    Switch battery single pole with lockout, black actuator 300A / 1500A M10 studs CARLINGSWITCH BDB10-BA
    $104.00 Inc GST
  • Cole Hersee Brass Battery Switch
    The Cole Hersee M-290 Series marine grade brass battery switch with alternator field disconnect has silver plated contacts. Rated 125A continuous, 1000A intermittent.
    Part No. Description Price Quantity
    201009
    Switch battery single pole 125A/800A Alternator Field Disconnect brass housing, chromed twist actuator COLE HERSEE M290 M290-05BX
    $162.00 Inc GST
  • BEP Contour battery switch
    The BEP 701 Contour battery switch, single circuit has an enclosed housing with removable rear and side covers and meets ABYC requirements. Can be used as a stand alone unit or interlocked together with other switches in a modular system using solid links. Can also be interlinked with a BEP VSR, allowing a powerful, yet compact, battery management system to be created. Dimensions 69mmx69mmx75mm high, fastening holes d5,5mm in 54,5mm square. Flush mountable in a 52mm cutout [protrusion 33,5mm, intrusion 41,5mm]. Studs M10 tin plated copper.
    Part No. Description Price Quantity
    201010
    Switch battery single pole 275A/1250A BEP 701B 113550
    $45.00 Inc GST
  • BEP Panel Mount Contour Battery Switch
    BEP 701-PM panel mount Contour battery switch, singlecircuit. Rated 275A continuous [1h], 455A intermittent [5min], 1250A cranking [10s]. The actuator can be removed after rotating anticlockwise 45° from the off position. The actuator also features an interchangeable labeling system, allowing a full range of applications. Dimensions 68mmx68mm, fastening holes d5,5mm in 54,5mm square, cutout 50 mm, shallow mounted protrusion 51mm, intrusion 16mm. Deep mountable in a 52mm cutout [protrusion 30,8mm, intrusion 36mm]. Studs M10 tin plated copper. Suitable for fitment to flush mounting plates and Contour Connect mounting plates. Switches can be interlinked using solid links.
    Part No. Description Price Quantity
    201011
    Switch battery single pole panel mount 225A/1250A BEP 701-PM 113548
    $48.00 Inc GST
  • BEP 700 Easyfit Battery Switch
    The BEP 700 Easyfit battery switch is based on the BEP 701 Contour switch , but has a long threaded shaft with mounting ring to allow for fitment through panels up to 19mm thick. Can also be surface mouted, ideal replacement for most european post and lever switches. Dimensions 68mm x 68mm, overall height 110mm. Shaft d24mm.
    Part No. Description Price Quantity
    201012
    Switch battery single pole Easyfit 225A/1250A BEP 700 113547
    $68.00 Inc GST
  • BEP 720 Heavy Duty Battery Switch
    The BEP 720 heavy duty single circuit battery switch is rated 600A continuous [1h], 800A [5min] intermittent, cranking 2500A [10s]. Can be used as a stand alone unit or interlocked together with other switches in a modular system. The actuator also features an interchangeable labeling system, allowing a full range of applications. Removable rear cover, meets ABYC requirements. Studs M12 tin plated copper. Dimensions 102mmx102mmx90mm high, fastening holes d5,5mm in 89,4mm square. Flush mountable in a 85mm cutout [protrusion 39mm, intrusion 51mm].
    Part No. Description Price Quantity
    201015
    Switch battery single pole 600A/2500A BEP 720 113551
    $146.00 Inc GST
  • BEP 770 Pro Installer Single Pole Battery Switch 400A/1500A
    A powerful new generation battery switch with outstanding performance and features for both the installer and end user. Three mounting options
    Part No. Description Price Quantity
    201016
    Switch battery single pole PRO Installer 400A/1500A BEP 770 114082
    $111.00 Inc GST
  • BEP 770-EZ Pro Installer Easy Mount Single Pole Battery Switch 400A/1500A
    As easy as 1, 2, 3, these revolutionary battery switches allow you to wire from the front. Never has installation been so easy and cabling so accessible. With their shared interconnection height, EZ-Mount battery switches "cluster" directly with the Pro Installer Busbar Range, resulting in the fastest, most compact installations. Optimized cable access makes installation a breeze. Pro Installer switches set the new benchmark with outstanding ergonomics, intuitive look/feel, and are engineered from the finest materials to withstand the harsh marine environment. The outstanding performance and features of this powerful new generation battery switch appeal to both the installer and end user. All ratings, footprints and features of the EZ-Mount switch match the high quality of our standard switches.
    Part No. Description Price Quantity
    201018
    Switch battery single pole PRO Installer EZ Mount 400A/1500A BEP 770-EZ 114081
    $120.00 Inc GST
  • Blue Sea Systems Battery Switch
    The Blue Sea Systems M-Series battery switch, single circuit has an enclosed housing with removable rear and side covers and meets ABYC requirements. This switch can optionally be panel mounted.. Dimensions 74mmx74mmx84mm, fastening holes d5,5mm in 55mm square. Panel mountable in a 59mm cutout [protrusion 42mm, intrusion 42mm]. Studs M10 tin plated copper.
    Part No. Description Price Quantity
    201020
    Switch battery single pole red 300A/900A Blue Sea Systems 6006B-BSS BS-6006
    $48.00 Inc GST
    201021
    Switch battery single pole black 300A/900A Blue Sea Systems 6006200B-BSS BS-6006200B
    $48.00 Inc GST
  • Part No. Description Price Quantity
    201022
    Switch battery single pole with key 300A/900A Blue Sea Systems 6005-BSS BS-6005
    $66.00 Inc GST
    201023
    Switch battery single pole with key 300A/900A black Blue Sea Systems 6005200-BSS BS-6005200
    $66.00 Inc GST
  • Blue Sea Systems Single Pole Battery Switch
    Switches a single battery to a single load group Ignition protected—safe for installation aboard gasoline powered boats. Case design allows surface or rear panel mounting.
    Part No. Description Price Quantity
    201025
    Switch battery single pole 350A/1200A Blue Sea Systems 9003eB-BSS BS-9003eB
    $68.00 Inc GST
    201026
    Switch battery single pole 350A/1200A with Alternator Field Disconnect Blue Sea Systems 9004E-BSS -
    $119.00 Inc GST
  • Blue Sea Systems Heavy Duty Single Pole Battery Switch
    Switches a single battery to a single load group. gnition protected—safe for installation aboard gasoline powered boats. Case design allows surface or rear panel mounting. Accepts two 4/0 AWG [95mm²] battery cables.
    Part No. Description Price Quantity
    201027
    Switch battery single pole Heavy Duty 600/1750A Blue Sea Systems 3000B-BSS BS-3000
    $135.00 Inc GST
  • Bep Pro Installer Battery Switch 0-1 Double Circuit 400A/1500A
    Another addition to our multi award winning Pro Installer EZ Mount range, the innovative Dual Bank Control switch is like 3 switches in one, House, Start, and Emergency Parallel. Offering easy intuitive control for the boater, the Dual Bank Control switch features a unique isolated-On position which allows use of house loads and VHF radio if the engine needs to be electrically isolated, or allows the engine to be isolated during servicing while still providing power to house loads [for lighting, stereo, fridge etc]. For boats or vehicles with single Engine and House battery bank, Dual Bank Control allows the use of optimized battery banks for their respective loads; an appropriately sized deep cycle bank for House loads, and thin plate starting batteries for the Engine. Further, sensitive electronics are isolated from starter motor induced voltage spikes because House and Engine loads are separated during normal operation, unlike Selector battery switches. As easy as 1, 2, 3, these revolutionary EZ Mount battery switches allow you to wire from the front for the easiest surface mounting. With their shared interconnection height, EZ-Mount battery switches "cluster" directly with the Pro Installer Busbar Range, resulting in the fastest, most compact installations. Optimized cable access makes installation a breeze.
    Part No. Description Price Quantity
    201116
    Switch battery 0-I dual circuit PRO Installer 400A/1500A BEP 772-DBC 114088
    $144.00 Inc GST
    201118
    Switch battery 0-I dual circuit PRO Installer EZ Mount 400A/1500A BEP 772-DBC-EZ 114089
    $162.00 Inc GST
  • Blue Sea Systems Dual Circuit Battery Switch
    Simultaneously switches two isolated battery banks or combines battery banks to all loads Make before break contact design allows switching between battery banks without power interruption.
    Part No. Description Price Quantity
    201120
    Switch battery 0-I dual circuit 300/675A Blue Sea Systems 6011B-BSS BS-6011
    $110.00 Inc GST
  • Blue Sea Systems Dual Circuit Battery Switch
    Simultaneously switches two isolated battery banks or combines battery banks to all loads Make-before-break contact design allows switching without power interruption Ignition protected—safe for installation aboard gasoline powered boats. Case design allows surface or rear panel mounting.
    Part No. Description Price Quantity
    201125
    Switch battery 0-I dual circuit 350/700A Blue Sea Systems 5511e-BSS BS-5511e
    $135.00 Inc GST
  • Bakelite Selector Switch
    Rotary 1/2/Both battery switch, budget product. Studs Rated 175A continuous, 300A intermittent. Make before break mechanism. For both 24 and 12V systems. 135 x 135 x 73mm.
    Part No. Description Price Quantity
    201200
    Switch battery selector 4 position 175A budget black bakelite 114304
    $104.00 Inc GST
  • Cole-Hersee Battery Selector Switch
    Cole-Hersee battery selector switch. Make before break mechanism. One of the best quality battery selector switches available with larger contact surface area than any other switch. 310A continuous.
    Part No. Description Price Quantity
    201205
    Switch battery selector 4 position 310A Cole Hersee M750 2767
    $118.00 Inc GST
  • BEP 701-S Contour Battery Selector Switch
    BEP 701-S Contour rotary 1/2/Both selector battery switch, similar 150101 above but in an enclosed housing with removable rear and side covers.
    Part No. Description Price Quantity
    201210
    Switch battery selector 4 position 275A BEP 701S 113557
    $80.00 Inc GST
  • BEP 701S-PM Panel Mount Battery Selector Switch
    BEP 701S-PM Contour rotary 1/2/Both selector battery switch, for panel mounting. Probably the most compact 1/2/Both switch available. Rated 200A/1000A 68mmx68mm.
    Part No. Description Price Quantity
    201211
    Switch battery selector 4 position 275A panel mount BEP 701S-PM 113553
    $78.00 Inc GST
  • BEP 721 Contour Heavy Duty Battery Selector Switch
    BEP 721 Contour rotary 1/2/Both battery selector switch, heavy duty, single pole. Rated 350A/1500A. Can padlocked in the off position. 102 x 102mm.
    Part No. Description Price Quantity
    201215
    Switch battery selector 4 position heavy duty 350A BEP 721 113556
    $153.00 Inc GST
  • Bep Pro Installer Selector Battery Switch 400A/1500A
    Power requirements on boats have increased, and these 2 Selector switches offer high power capacity [400 amps continuous], the ability to easily fit doubled cables, and conform to the industry standard mounting footprint [Guest, Perko, Blue Sea]. Please note selector switches will not separate electronics from harmful engine starting spikes. Note
    Part No. Description Price Quantity
    201216
    Switch battery selector 4 position Pro Installer 400A BEP 771-S 114086
    $161.00 Inc GST
    201217
    Switch battery selector 4 position Pro Installer 400A with AFD BEP 771-SFD 114087
    $164.00 Inc GST
    201218
    Switch battery selector 4 position Pro Installer Ezi-Fit 400A BEP 771-S-EZ 114083
    $167.00 Inc GST
  • Blue Sea Systems m-series Selector 3 Position Switch
    Switches a single battery to a single load group. Ignition protected—safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting.
    Part No. Description Price Quantity
    201220
    Switch battery selector 3 position 300A Blue Sea Systems 6008-BSS -
    $110.00 Inc GST
    201221
    Switch battery selector 3 position 300A black Blue Sea Systems 6008-BSS -
    $110.00 Inc GST
  • Part No. Description Price Quantity
    201222
    Switch battery selector 4 position 300A Blue Sea Systems 6007-BSS BS-6007
    $89.00 Inc GST
  • Blue Sea Systems e-series Selector 3 Position Switch
    Switches a single battery to a single load group Includes AFD [Alternator Field Disconnect] Ignition protected—safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting.
    Part No. Description Price Quantity
    201224
    Switch battery selector 3 position 350A with AFD Blue Sea Systems 11001-BSS BS-11001
    $100.00 Inc GST
  • Blue Sea Systems 4 Position Battery Switch
    Switches isolated battery banks to all loads or combines battery banks to all loads Make-before-break contact design allows switching between battery banks without power interruption Ignition protected—safe for installation aboard gasoline powered boats. Case design allows surface or rear panel mounting.
    Part No. Description Price Quantity
    201225
    Switch battery selector 4 position 350A with AFD Blue Sea Systems 9001E-BSS BS-9001E
    $106.00 Inc GST
  • Blue Sea Systems Heavy Duty 4 Position Battery Switch
    Switches isolated battery banks to all loads or combines battery banks to all loads. Make-before-break contact design allows switching between battery banks without power interruption Ignition protected—safe for installation aboard gasoline powered boats. Case design allows surface or rear panel mounting. Accepts two 4/0 AWG [95mm²] battery cables.
    Part No. Description Price Quantity
    201227
    Switch battery selector 4 position 500A with AFD Blue Sea Systems 3002-BSS BS-3002
    $205.00 Inc GST
  • BOSCH Heavy Duty Double Pole Battery Switch with removable Key
    BOSCH battery switch, double pole, heavy duty, top quality, all metal with removable key. Rated 250/2500A. Flange 140mm x 105mm.
    Part No. Description Price Quantity
    201302
    Switch battery double pole 250A BOSCH 0341003004
    $229.00 Inc GST
  • BEP 720-DP Contour Battery Switch, Heavy Duty, Double Pole
    BEP 720-DP Contour battery switch, heavy duty, double pole. Rated 400/1500A. 102mmx102mm Flush mountable in a 85mm cutout. For flush mounting plates see 150906 etc.
    Part No. Description Price Quantity
    201315
    Switch battery double pole 400/1500A BEP 720-DP 113527
    $231.00 Inc GST
  • BEP Pro Installer Double Pole Battery Switch
    The BEP 770-DP is powerful new generation battery switch rated 400A/1500A with outstanding performance and features for both the installer, and end user. Three mounting options
    Part No. Description Price Quantity
    201317
    Switch battery double pole Pro Installer 400A BEP 770-DP 114084
    $142.00 Inc GST
  • BEP Pro Installer EasyFit Double Pole Battery Switch 400A/1500A
    As easy to mount as 1, 2, 3, these revolutionary battery switches allow you to wire from the front. Never has installation been so easy and cabling so accessible. With their shared interconnection height, EZ-Mount battery switches “cluster” directly with the Pro Installer Busbar Range, resulting in the fastest, most compact installations. All ratings and footprint of the EZ Mount Switch match those of the corresponding Pro Installer 770 series standard mount switch, offering the same high quality functionality, but with optimized, easy surface mounting.
    Part No. Description Price Quantity
    201318
    Switch battery double pole Pro Installer EZIFIT 400A BEP 770-DP-EZ 114085
    $159.00 Inc GST
  • Blue Sea Systems Dual Circuit Battery Switch
    Simultaneously switches two isolated battery banks. Ignition protected—safe for installation. Aboard gasoline powered boats. Case design allows surface or rear panel mounting.
    Part No. Description Price Quantity
    201320
    Switch battery double pole 300A Blue Sea Systems 6010-BSS BS-6010B
    $110.00 Inc GST
  • Blue Sea Systems Double Pole Battery Switch
    Simultaneously switches two isolated battery banks Ignition protected—safe for installation aboard gasoline powered boats. Case design allows surface or rear panel mounting.
    Part No. Description Price Quantity
    201325
    Switch battery double pole 350A Blue Sea Systems 5510EB-BSS BS-5510E
    $94.00 Inc GST
  • BEP Remote Operated Battery Switch 701-MD
    The 701-MD battery switch allows for installation of the switch very close to the battery to be remotely controlled. This reduces cable lengths and sizes, providing significant savings in expense and weight without the disadvantages of limited contact ratings and power draw of contactors. They are also ideal for remote isolation of bow and stern thrusters. They include LED status identification for the remote control switch and have manual override capability. Standby current is 12mA. With the same mounting dimensions as standard BEP 701 battery switches, they can be surface or panel mounted. Rated 275A continuous, 455A intermittent 5 minutes and 1250A for crankjing.10 seconds.
    Part No. Description Price Quantity
    201410
    Switch battery motor driven 275A 9-33V, controlled by 0-I switch BEP 701-MD 113670
    $353.00 Inc GST
  • Heavy Duty Remote Operated Battery Switch 720-MD
    The BEP720-MD Heavy Duty battery switch allows for installation of the switch very close to the battery to be remotely controlled. This reduces cable lengths and sizes, providing significant savings in expense and weight without the disadvantages of limited contact ratings and power draw of contactors. They are also ideal for remote isolation of bow and stern thrusters. They include LED status identification for the remote control switch and have manual override capability. Standby current is 12mA. With the same mounting dimensions as standard BEP 720 battery switches, they can be surface or panel mounted. Rated 600A continuous, 800A intermittent 5 minutes and 2500A for cranking.10 seconds. The switch can be controlled using the BEP key switch panel 201419 or any other latching on-off switch.
    Part No. Description Price Quantity
    201415
    Switch battery motor driven 500A, controlled by 0-I switch BEP 720-MDO 113671
    $461.00 Inc GST
  • Remote Mounted Key Switch for BEP Motor Driven Switches
    This On/Off [latching] key switch is used for the remote operation of the 701-MD and 720-MDO battery switches. Plate dimensions 68mm x 68mm. It can be mounted as a stand-alone or within the Contour Connect panel range. Includes red LED status indicator light. If used for applications other than the BEP remote battery switches a resistor must be wired in series with the indicator light.
    Part No. Description Price Quantity
    201419
    Remote key switch panel for BEP 701-MD & 720-MDO motor driven switches 80-724-0006-00 113546
    $198.00 Inc GST
  • Blue Sea ML Magnetic Remote Battery Switches
    These remote battery isolation switches are available for 12 Volts or 24 Volts and have manual override actuators. They are available with either Bi-stable or Mono-stable controls. The bi-stable switches are controlled by a pulse from a momentary-on switch. The switch stays on after receiving the pulse without drawing any further current. The switch is turned off by a second pulse of the control circuit. The bi-stable switches can switch loads with voltages up to 64 Volts. The mono-stable switches are controlled by a latching switch and are switched on for as long as there is power on the control circuit. The control circuits will draw a low current of less than 13mA for as long as they are on. The mono-stable battery switch will be turned off as soon as power is removed from the control circuit. The mono-stable switches can switch loads up to the voltage as the rating of the switch. These switches can be controlled by any momentary-on or latching-on switches respectively, or dedicated Blue Sea rocker switches with slider guards and labels can be ordered as optional extras. The switches have a switched output for a remote indicator light. Rated up to 500A continuous, 1450A cranking, see pdf for wire size requirements. M10 studs
    Part No. Description Price Quantity
    201420
    Switch battery remote single circuit 500A with isolated control circuit , bistable (momentary control) no switch 16.5Vmax Blue Sea Systems 7700B-BSS BS-7700B
    $340.00 Inc GST
    201421
    Switch battery remote single circuit 500A with isolated control circuit , bistable (momentary control) no switch 32Vmax Blue Sea Systems 7702B-BSS BS-7702B
    $340.00 Inc GST
    201422
    Switch battery remote single circuit 500A with isolated control circuit , monostable (latching control) no switch 16.5Vmax Blue Sea Systems 7713B-BSS BS-7713B
    $463.00 Inc GST
    201423
    Switch battery remote single circuit 500A with isolated control circuit , monostable (latching control) no switch 32Vmax Blue Sea Systems 7717B-BSS BS7717-B
    $393.00 Inc GST
  • MASTERVOLT Battery Watch Remote Electronic Battery Isolator with Low/High Voltage Cut-out
    The Mastervolt Battery Watch is an electronic, remote mounted battery isolator that also has low and high voltage cut outs and alarms. It is an electronic watchdog that ensures longer battery life. Rated 150A, as a remote main battery isolation switch. It has an integral audible alarm and LED lights provide a clear read out. The unit automatically senses whether the system voltage is 12V or 24V. The under-voltage cut-out switch point can be set between 9 and 12V [18 and 24V] using DIP switches, the over-voltage cut-out switch point is 15,5V [31V]. Completely corrosion-proof material with aluminium heat sinks, the electronic components are encased in synthetic materials. The synthetic end plates feature connection lugs, the solid bolt connections with nuts and locking rings ensure easy installation. Dimensions 157 x 140 x 80 mm
    Part No. Description Price Quantity
    201430
    Switch battery BatteryWatch with alarm and disconnect 12/24V MASTERVOLT 83200150 110818
    $350.00 Inc GST
  • Victron BatteryProtect
    The BatteryProtect disconnects the battery from non essential loads before it is completely discharged [which would damage the battery] or before it has insufficient power left to crank the engine.
    Part No. Description Price Quantity
    201440
    Battery Protect 12-24V 65A VICTRON BPR000065400
    $64.00 Inc GST
    201442
    BatteryProtect 12/24V 100A VICTRON BPR000100400
    $95.00 Inc GST
    201444
    Smart BatteryProtect 12/24V 220A VICTRON BPR000220400
    $156.00 Inc GST
  • Victron Smart BatteryProtect
    The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged [which would damage the battery] or before it has insufficient power left to crank the engine. When using Bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set. Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin.
    Part No. Description Price Quantity
    201450
    Smart Battery Protect 12/24V65A VICTRON BPR065022000
    $96.00 Inc GST
    201452
    Smart BatteryProtect 12/24V 100A VICTRON BPR110022000
    $126.00 Inc GST
    201454
    Smart Battery Protect 12/24V220A VICTRON BPR122022000
    $188.00 Inc GST
  • BLUE SEA SYSTEMS Low Voltage Disconnect
    The Blue Sea m-LVD is designed to disconnect loads from a battery when the battery voltage falls below a set voltage. Five disconnect settings between 11.3V and 12.1V can be selected using the remote rocker switch 7928 supplied with the unit. The remote rocker switch is also used to connect or manually disconnect the loads until the voltage rises or to override circuit disconnect by 10 minutess. Indicator lights on the unit as well as the rocker switch flash after a five-minute delay after the battery voltage has fallen below the set point. Whilst the lights are flashing an alarm output is also activated, onto which an alarm such as a buzzer [not supplied] can be connected. The relay will disconnect the loads a further five minutes after the alarm mode has activated. The unit can be mounted behind or in front of a panel or surface mounted. Housing dimensions 73 x 73 x 65mm, four d5mm mounting holes on 55.2mm centres. Rear panel mount through d59mm hole, intrusion 48mm. Front panel mount through d67mm hole, protrusion 35mm, intrusion 26mm, max. panel thickness 8mm. Terminal stud size ¼ inch/6mm.
    Part No. Description Price Quantity
    201460
    Low voltage battery disconnect m-LVD with override rocker switch BLUE SEA SYSTEMS 7635B-BSS BS-7635
    $192.00 Inc GST
  • VICTRON ENERGY Diode Battery Combiners
    Diode Battery Combiners are used to guarantee continuous DC power to mission critical equipment, such as an electronic engine control system. With a diode battery combiner two DC power sources can be used to supply the mission critical load without paralleling the sources, so that they cannot discharge into each other. Failure of one source will not interrupt power to the critical load. The Argo Battery Combiners feature a low voltage drop thanks to the use of Schottky diodes
    Part No. Description Price Quantity
    201470
    Battery combiner diode 40A VICTRON BCD000402000
    $65.00 Inc GST
    201472
    Battery combiner diode 80A VICTRON BCD000802000
    $80.00 Inc GST
  • Spare Key for Battery Switch 201000
    Spare key for battery switch 201000
    Part No. Description Price Quantity
    201900
    Key for battery switch 201 000 Hella 4652
    $11.00 Inc GST
  • Spare Key for Battery Switch 201001
    Spare key for battery switch 201001
    Part No. Description Price Quantity
    201901
    Key for battery switch metal 201001 Hella 4654
    $31.00 Inc GST
  • Part No. Description Price Quantity
    201908
    Mounting plate for 701 battery switches, 1way 95x95mm BEP BSP-1 113581
    $58.00 Inc GST
    201909
    Mounting plate for 701 battery switches, 3way 233x95mm BEP BSP-3 -
    $104.00 Inc GST
  • Spare Actuator for BEP 700/701 Switches
    Red actuator knob as supplied as standard on BEP 701 series battery switches. The actuator can be fitted and removed when it has been rotated 45 anti-clockwise from the off position.
    Part No. Description Price Quantity
    201910
    Actuator/key red for battery switch 701 BEP 701-KEY 113549
    $13.00 Inc GST
  • Yellow Actuator for BEP 700/701 Switches
    Yellow version of the standard actuator for the BEP 700/701 type battery switch for fitment to emergency paralleling switches in order to clearly distinguish these from other switches.
    Part No. Description Price Quantity
    201911
    Actuator/key Emergency Parrallel yellow for 701 battery switch BEP 701-KEY-EP 113590
    $14.00 Inc GST
  • BEP Battery Switch Label Sets
    These BEP battery switch label sets are suited to the BEP 701 and 720 battery switches and replace the generic labels that the switches are supplied with in order to identify various circuits. The 3 label set only has House , Start and Emergency Parallel labels. The 14 label set has House, Start, Port Start, Mid Start, Starboard Start, 1, 2, Genset, Radio, Chassis, Emergency Parallel, Inverter, Bow thruster and Winch labels.
    Part No. Description Price Quantity
    201912
    Label sheet for battery switches, 3 labels BEP SET-715 113691
    $13.00 Inc GST
    201913
    Label sheet for battery switches, 14 labels BEP 713 113690
    $39.00 Inc GST
  • BLUE SEA Battery Switch ICON Label Kit
    18 icon labels for battery switches to identify circuits. Suits most Blue Sea battery switches.
    Part No. Description Price Quantity
    201919
    Label sheet for battery switches, 18 labels Blue Sea Systems 7902-BSS -
    $15.00 Inc GST
  • Terminal Links for BEP Components in Contour Housings
    These nickel plated copper links are designed to interlink and provide good electrical connection between BEP battery switches, bus bars and distribution studs in BEP Contour housings. See attached pdf for application guidance.
    Part No. Description Price Quantity
    201920
    Battery terminal link solid 42.5mm d10 BEP 708-42.5 113660
    $9.00 Inc GST
    201921
    Battery terminal link solid 54.5mm d10 BEP 708-54.5 113661
    $15.00 Inc GST
    201922
    Battery terminal link solid 64.5mm d10 BEP 708-64.5 113662
    $15.00 Inc GST
    201923
    Battery terminal link solid 68.5mm d10 BEP 708-68.5 113663
    $14.00 Inc GST
    201924
    Battery terminal link solid 62mm d12 BEP 708-62.0 113664
    $19.00 Inc GST
    201925
    Battery terminal link solid 102mm d12 BEP 708-102 113665
    $25.00 Inc GST
    225165
    Circuit breaker Bussman in housing 080A 705-80A 113634
    $198.00 Inc GST
  • BEP Flexible Terminal Link
    BEP flexible terminal link suited to connect switch 201010 to VSR 160045.
    Part No. Description Price Quantity
    201929
    Battery terminal link to VSR flexible 90mm d6/d10 BEP
    $1.50 Inc GST
  • End to End Terminal Links for BEP Pro-Installer Components
    These links are designed to interlink BEP Pro-Installer battery switches, fuse holders,bus bars and distribution studs. Pro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to save space and allow for the most compact installations. The common interconnection height of Pro Installer components allow link bars to quickly and easily convert a group of different products into a functional cluster. Pro Installer link bars are made of high purity copper and are tin plated for optimum marine electrical performance. Links can be doubled to accomodate higher loads. See attached pdf for application guidance.
    Part No. Description Price Quantity
    201930
    Link bar Pro-Installer 2 way end to end pitch 31 - 34.7mm Overall 56mm x 25mm BEP 779-LB-1-B -
    $13.00 Inc GST
  • End to Side Terminal Links for BEP Pro-Installer Components
    End to Side Terminal Links for BEP Pro-Installer Components, details as above.
    Part No. Description Price Quantity
    201931
    Link bar Pro-Installer 2 way end to side pitch 35.5-42.5mm Overall 69mm x 25mm BEP 779-LB-2-B -
    $14.00 Inc GST
  • Side to Side Terminal Links for BEP Pro-Installer Components
    Side to Side Terminal Links for BEP Pro-Installer Components, details as above.
    Part No. Description Price Quantity
    201932
    Link bar Pro-Installer 2 way side to side pitch 46-50mm Overall 74mm x 25mm BEP 779-LBJ-2-B -
    $16.00 Inc GST
    201933
    Link bar Pro-Installer 3 way side to side Overall 123mm x 25mm BEP 779-LBJ-3-B -
    $25.00 Inc GST
    201934
    Link bar Pro-Installer 4 way side to side Overall 172mm x 25mm BEP 779-LBJ-4-B -
    $33.00 Inc GST
    201935
    Link bar Pro-Installer 5 way side to side Overall 221mm x 25mm BEP 779-LBJ-5-B -
    $45.00 Inc GST
    201936
    Link bar Pro-Installer 6 way side to side Overall 270mm x 25mm BEP 779-LBJ-6-B -
    $52.00 Inc GST
  • End to End Terminal Link for BEP Pro-Installer Z Bus Bars
    End to End Terminal Links for BEP Pro-Installer Z-Bus bars, details as above.
    Part No. Description Price Quantity
    201937
    Link bar Pro-Installer 2 Z bars end to end Overall 49mm x 12mm BEP 779-LBZ-1-B -
    $6.00 Inc GST
  • Z Bus Bar to Component Terminal Link for BEP Pro-Installer Z Bus Bars
    Z Bus Bar to Component Terminal Link for BEP Pro-Installer Z-Bus bars, details as above.
    Part No. Description Price Quantity
    201938
    Link bar Pro-Installer Z bar to bus or stud Overall 53mm x 12mm BEP 779-LBZ-2-B -
    $10.00 Inc GST
  • Blue Sea Systems Link
    Link for use with Blue Sea Systems ML series Remote Battery Switches and Automatic Charging Relays. 500 Amp continuous rating, hole pitch 57mm to 70mm.
    Part No. Description Price Quantity
    201950
    Link for Blue Sea remote battery switches 9160-BSS -
    $34.00 Inc GST